Vinyl Record Cleaning Tools

Vinyl Record Cleaning Tools

Choose a record fluid and protect the label

Read the material and mixing instructions for the exact fluid. Decide separately how the record will be supported and how the label will be kept clear of liquid.

Identify the material first

Do not assume that every vintage disc is vinyl. Identify the material before applying liquid. Pro-Ject explicitly documents Wash it 2 for vinyl and shellac, but that does not establish compatibility for another formula.

Compare a concentrate with a ready-to-use fluid

A concentrate is prepared according to its own label or washer instructions. A ready-to-use product arrives already diluted. Do not transfer the amount or mixing method from one formula or machine to another.

Plan how you will keep the label clear

For manual washing, compare the work surface and any separate label protector. Check the clamp's contact area and supported diameter. A mat underneath the disc does not act as a seal.

Source documentation

Guide questions

Can I mix fluid based on the amount used in another washer?

Use the maker's directions for the formula and the machine you own. Concentrates can differ in their mixing requirements.

Is a ready-to-use fluid always suitable for shellac?

Check the exact product documentation. Suitability for vinyl does not establish suitability for shellac.

Does a label clamp prove that the record is washable?

The clamp addresses label contact. Verify the disc material and the cleaning method independently.

Which accessory suits the job?

  1. The Spin-Clean bottle is a concentrate for its manual basin. G-Sonic is an additive for a compatible ultrasonic bath. Identify the machine and follow the directions for the particular formula rather than sharing a mixing ratio.

    Spin-Clean 8-ounce washer fluid concentrate ↗GrooveWasher G-Sonic ultrasonic record wash concentrate ↗

Accessories in this guide

Shop these departments